Found 1212 Pumps Submersible Products.
This unique utility pump passes 1/2in. solids such as leaves, pebbles, and other debris without clogging. 1 1/4in. discharge is adaptable to garden hose thread with rotating adapter (included). Motor is thermally protected to prevent overheating. Easy-access handle for complete portability. 1-year limited warranty. U.S.A. Flow (GPH): 2,500, Volts: 115, HP: 1/2, Max. Total Head (ft.): 15, Suction Type: Bottom, Discharge Port (in.): 1 1/4 (3/4 Adapter Included), Pump Housing: Glass Reinforced Thermoplastic, Volute: Glass Reinforced Thermoplastic - will not corrode or rust, Impeller Shaft: Glass Reinforced Thermoplastic - will not corrode or rust, Solid Handling (in.): 1/2, Power Cord (ft.): 8, Thermal Overload Protection: Yes
1/6 HP motor has thermal-overload protection to prevent burn out. Oil-less motor design for environmentally safe operation. 3/4in. adjustable discharge adapter connects to standard garden hose. Easy-access handle for complete portability. UL and CSA listed. U.S.A. Flow (GPH): 3,000, Volts: 115, Max. Total Head (ft.): 15-20, Max. Suction Lift (ft.): 15, Discharge Port (in.): 1 1/4 (3/4 Adapter Included), Volute: Impact Resistant-Will not corrode or rust, Impeller Shaft: Impact Resistant-Will not corrode or rust
The Simer Geyser II 1/4 HP submersible utility pump comes with an 8-foot power cord, garden hose adapter, and a thermoplastic corrosion-resistant body. It features a maximum pumping capacity of 1260 gph while its 115-volt, 6 Amp oil-filled Simer motor provides dependable high efficiency. With built-in thermal overload protection, the pump comes with a 1-year limited warranty.
This pump features a dry rotor (sealed), is oil less, and has a UL listed, 3 prong cord with ground. It has a half inch MNPT discharge , accepts 3/4 inch I.D. hose, has screened suction, and belongs to Beckett's Versa Gold Series. The pump is perfect for large ponds, small waterfalls, fountain nozzles, and other water features and has a lift of up to 12.4 feet. It can be used for ponds as large as 535 gallons. Its filters are designed to improve the efficiency and life of the pump and are easily disassembled for cleaning. Optional MFB235 filter extends pump life. This pump also boasts a direct drive, epoxy encapsulated design, an inlet screen designed for continuous duty, and a ball bearing motor matched to a dynamic shaft seal. It pumps 500 gph at a one foot height.
The Wayne 1/2 HP cast iron submersible sump pump is designed for work in sump pits 11 inches or larger. Its ceramic mechanical seal keeps this pump going in even the most demanding environments, and the 1 1/2-inch discharges creates maximum flow and ensures easy installation. It works 9 inches on level or 4 inches off level. A two-pole switch prevents basement flooding in the event that one pole sticks, and disconnecting 115-volt conductors prevent damage from lightning. The automatic overload mechanism prevents damage to motor windings, permanently lubricated ball bearings need no oiling, and the waterproof three-prong grounding wire with an 8-foot extension reaches distant outlets. Wayne backs its pump with a three-year limited warranty.
Perfect for a water garden or fountain feature. Provides healthy circulation for up to 700 gallon ponds. Pumps 325 gph at one foot height. Maximum lift is 12.2 feet. UL and CSA approved, this pump operates at 115 volts with an extra long 20 foot cord and connects with half inch ID tubing. And it's oil free and environment friendly. This is a low maintenance, continuous duty operation pump.
For use in Residential applications with light to medium transfer demands. Pumps up to 18.3 GPM. Pumps down to an 1/8in. from the floor. Includes garden hose adapter and removable inlet screen for easy cleaning. UL and CSA listed. 1-year limited warranty. Flow (GPH): 1,200, Volts: 115, HP: 1/6, Max. Total Head (ft.): 26.3, Max. Suction Lift (ft.): 26.3, Discharge Port (in.): 1, Pump Housing: Durable Protective Epoxy Coating for Corrosion Resistance, Volute: Nylon, Impeller Shaft: Nylon, Seals: Viton, Power Cord (ft.): 10
Submersible Utility Pump Ideal for emergency water removal Great for basements, rooft...
The Wayne 115V transfer pump is a portable, lightweight pump that is ideal for household use. Flow (GPH): 310, Volts: 115, Self-Priming: Yes, Volute: chrome-plated bronze volute
The CDU790 features durable cast iron housing for long life and quiet operation. Fits small sump pits! This submersible pump is compactly designed for 11in. or larger sump pits. Automatic on/off action with mechanical float switch. Stainless steel fasteners for superior corrosion-resistance. Top suction design. Plus, permanently lubricated ball bearing for easy maintenance. UL and CSA listed. 3-year limited warranty. U.S.A. Flow (GPH): 3,450, Volts: 115, HP: 1/3, Max. Total Head (ft.): 20, Discharge Port (in.): 1 1/2, On-Level (in.): 9, Off-Level (in.): 4, Min. Basin Needed (in.): 11, Impeller Shaft: Glass Reinforced Poly-Carbonate
Top Search
Last Search
